| |
|
| Portable
fabrication shops can provide all weather protection for your
valuable staff. These
structures will increase productivity and quality of your products. The
membrane emits a natural glow of light during daylight hours.
This bright environment is perfect for field fabrication. You
can cut, weld, and grind efficiently when you are out of the
wind, rain, and snow. This shelter (60ft wide x 90ft long x
22ft center) was installed in New Jersey in the mid 90's and
it is still in use today. |
 |
| New
Jersey |
|
|
| |
|
|
 |
| North
Dakota |
|
|
This
structure was used as a Fabrication Shop for a 14 month project
beginning July of 2000. When the project was complete it was
relocated to its current location in La Cygne, Kansas. This
unique design allows for the building to be split into two independent
sections that are 30ft long. A soft weather seal connects the
two individual sections when they are installed end to end to
create one complete structure 60ft in length. |
| |
|
|
 |
| Texas |
|
|
This
structure was custom built to be utilized as a temporary work
shelter on a turnaround for ABB Power. The lightweight frame
allows the customer to install/disassemble quickly and easily.
Storage space for the shelter is also minimized. This shelter
is mounted on swivel wheels for easy relocation on the job site.
|
| |
|
|
 |
| Arizona |
|
|
These
two shelters were purchased to enclose power generation equipment.
The installation was completed in phases. The first phase was
to complete the shelters with open end walls. APS then installed
their equipment. The 2nd phase included the assembly of the
end walls and completion of the electrical lighting. |
| |
|
|
| Enclosures
for sensitive camera equipment on Pennsylvania Avenue. These
structures stand watch over some of the highest security regions
of the country. They stand next to one of our competitor's
shelters that needed some repairs after a wind storm. |
 |
| Washington,
D.C. |
|
|
| |
|
|
 |
| Dayton,
Ohio |
|
|
|
The environmental construction company who purchased this 24ft
wide x 60ft long x 20ft center height wash down shelter has
been able to contain contaminants in one area on the job site.
Every piece of equipment stops for a wash before leaving the
area of contamination. The structure is tall enough to raise
the bed of a dump truck to clean the undercarriage. |
| |
|
|
 |
| Danville,
Pennsylvania |
|
|
|
Big
Top shelters can span existing walls to protect the contents
below. At this job site in Pennsylvania this customer used
2 units 44ft x 75ft long x 13ft center height structures to
cover four different buildings. The crane in the picture relocates
each structure to the working area based on the job schedule. |
| |
|
|
|
Municipal
road maintenance crews use our buildings to cover equipment.
Equipment yards are always in a state of
change from year to year. Our structures move and grow with
your company. If you ever decide
to build a conventional structure you can sell your Big Top
back to us or anyone else. If you wish, you can lease the
structure for as little as 6 months to a year.
|
 |
| Tallahassee,
Florida |
|
|
|
